Air Jacketed CO2 Incubator LACI-303

Labocon Air Jacketed CO2 Incubator 300 series is ideal for the experiments involving cultivation of animal cells, sperm/ ovum, anaerobic cells, all types of microbe cells, hatching/ germinating and special tissues.

Chamber Volume 850 L
No. of Shelves 3 (Max. 15 can be used)
Temperature Range Ambient +5°C to 60°C
Temperature Accuracy ±0.25°C at 37°C
Temperature Increment 0.1°C
Temperature Control Microprocessor Digital PID
Hot Air Decontamination (Optional) 100°C
CO2 Range 0% to 20%
CO2 Accuracy ± 0.1% at 5% 37°C
CO2 Increment 200.10%
CO2 Sensor IR CO2 Sensor
CO2 Control Microprocessor
CO2 Inlet Pressure range 0.9 ~ 1. 0 bar
Outer door Silicon Packing Magnet Door
Inner door Tempered Glass Door
Operating panel Individual 2 Channel Touch Button
Display LED Display
Jacket Type Dry wall type (6 side heat)
Chamber Material Stainless Steel (304)
Chamber Dimensions (WxDxH) 698x799x1528 mm
Overall Dimensions (WxDxH) 820x950x1840 mm
Power Supply 220V 50Hz
Weight 266 kg

Labocon Air Jacket CO2 Incubator LACI-400 Series are widely used for research in life science, immunology, genetics, clinical medicine, agriculture science, pharmaceutics, pharmaceutical industry, food industry, toxicology, basic biology and clinical medicine.

• 6 sides Direct Heating System

Electric Heating wire is covered on all sides of chamber which makes stable uniformity and provides fast heat-up & temperature recovery.

3 parts of heating section are controlled and calibrated individually by 3 temperature sensors.

• Dry Wall and Air Jacket

Warm air from heating wire is preserved in space between chamber and insulation. It helps temperature recovered faster and minimize heat loss.

Dry wall with insulation is not required to regular maintenance.

• Dual Beam IR CO2 Sensor

Fast and precise detection for CO2 gas regardless of temperature and humidity.

• Natural Humidification using Water Tray

The heater on the bottom side warms the water in tray and it makes humidification. Circulation fan delivers the moisture from the water in the entire chamber.

• No Condensation

Heating by Front door heater and Frame heater prevent condensation in chamber and on glass door.

• Microprocessor PID Control

Intelligence control for CO2 density, Temperature, Alarm, Automatic Decontamination (optionally available).

• HEPA Filtration of Gas supply inlets

• Additional Features:

• Natural Air and Moisture Convection Air and Moisture in chamber are distributed naturally by 6 side heating, air circulation fan.

• Rounded Corner allows easy cleaning. Entire chamber is made of Stainless steel (SUS 304).

• Buzzer to alarm low or high deviation of CO2, Temperature.

• Perforated Shelves are good for natural air flow and are made of Stainless steel which are resistant against rust and contamination.

• Heating is automatically cut-off by safety device when temperature control fails or there is excessive heating over set point.

• Access port is optionally available for additional devices used in the chamber.

• Access Port

25 mm Access port is available at left side. (Upon ordering and additional charge)

• UV Sterilization

4W UV is placed up of chamber ceiling and beside of circulation fan. The UV light is not reached to sample and sterilization is operated during culturing.

• Cooling Control

Peltier is applicable in LACI-301 & 302. -5°C from room temperature but maximum lowest temperature is up to 20°C.

• Copper Chamber

Customized copper chamber with oxidizing copper/ copper-plated chamber for enhanced contamination protection.

• Multi Gas control (O2 Control)

Multi gas supply (N2 & O2) is available for all CO2 Incubators. But, LACI-301 is recommendable due to High Gas consumption when performing Hypoxia or Hyperoxia.

• Hot Air Decontamination

Maximum 125°C dry hot air in LACI-301 & LACI-302

Maximum 100°C dry hot air in LACI-303

• Monitoring System

Using Internet network, monitoring system has been designed to observe the status of equipment in real time even in the far distance.

• Split Inner Door

Lower gas consumption, Lower heat loss, Fast recovery, Easy classification for various samples.

5 Split doors available for LACI-301

6 Split doors available for LACI-302

• Gas Regulator & CO2 Analyser

(For LACI-301, LACI-302 & LACI-303)

• Shelves

(For LACI-301, LACI-302 & LACI-303)

• Roller Base

(LACI-301 & LACI-302)

• Stacking Kit

(LACI-301 & LACI-302)