Single Beam Visible Spectrophotometer LVS-303

Labocon Single Beam Visible spectrophotometers LVS-300 Series offers measurement range of 320-1100nm at bandwidth of 2 and 4nm; which provides high accuracy, reproducibility and high throughput at each run.

These LVS-300 Series are inbuilt with highly durable tungsten halogen lamp, which best suitable for:

• For measurement of DNA, RNA and oligonucleotide and Protein

• Proteins can be quantitated by BCA, Biuret, Bradford, Direct UV and Lowry

• The OD of bacterial cell culture solutions can be measured to optimize harvest times

• For the determination of metal and organic non-metal analytes in water

• Ideal to be use in petrochemical labs as they are solvent resistant such as Naphthalene in aviation

• Ideal to be use in petrochemical labs as they are solvent resistant such as Naphthalene in aviation

Wavelength Range 320-1100 nm
Wavelength Accuracy ±0.5 nm
Wavelength Repeatability 0.3 nm
Spectral Bandwidth 2 nm
Stability ±0.001 A/hr at 500 nm
Baseline Flatness -
Photometric Range 0.200 %T, -0.3-3 A, 0-1999 C
Photometric Accuracy ±0.5 %T or ±0.004 A at 1A
Photometric Repeatability -
Photometric Mode None
Monochromator -
Stray Light 0.05 %T at 360 nm
Light Source Tungsten-Halogen Lamp
Display LCD
Overall Dimension 470x373x187 mm
Power -
Power Supply 220V 60Hz
Weight 12 kg
Catalog No. 9141155346

Labocon Visible Spectrophotometer LVS-300 Series is widely used in educational institutes, medical and health clinics, biochemistry field, chemical engineering, environmental protection, food industry, pharmaceutical industry, quality control departments, etc.

• Wavelength range

  1. 320nm-1100nm

• Optical System

  1. 1200 lines/mm line Czerny Turner Diffraction Grating monochromator ensures high resolution, high photometric accuracy and low stray light

• Bandwidth

  1. 2&4nm

• Detector

  1. Silicon Photodiode

• Measurement Range with ultra-low Stray Light

  1. With its ultra-low stray light ≤0.05%Tis achieved on wavelength range of 320 - 1100 nm

• Sample size

  1. A wide range of standard cuvettes can be used based on the sensitivity or sample volume requirements.

• Sophisticated and simplified sample analysis software

  1. The Sample analysis software deliver scanning, fixed wavelength analysis, quantitative analysis, data collection, storage, export, and reporting.
  2. With additional feature of an easy access USB port available in the unit, which enables results to be stored directly to a USB memory stick for easy transfer of data.

• LCD display

• Large sample compartment to accommodate 5-100mm cuvettes with holders

• USB port and parallel port

• PC software (optional)

• Can store up to 200 results

• Automatic switching between deuterium and tungsten lamp

• Automatic wavelength setting

• Data can be restored in case of power failure

• PC software